■ SIM card and battery installation
Keep all SIM cards out of the reach of small children. For availability and
information on using SIM card services, contact your SIM card vendor. This may
be the service provider, network operator, or another vendor. Before installing
the SIM card and removing the battery, always switch the device off, and
disconnect the charger.
The SIM card and its contacts can easily be damaged by scratches or bending, so
be careful when handling, inserting, or removing the card.
Always switch off the power, and disconnect the charger and any other device
before removing the cover. Avoid touching electronic components while
changing the cover. Always store and use the device with the cover attached.
To install the SIM card, do the following:
1. Press firmly and slide the top of the back cover
to release it; then continue sliding the back
cover to remove and lift it from the phone.
2. After you have removed the back cover, insert
your finger under the battery, and lift it as
shown.
3. Place a fingernail in the middle of the metal
SIM card holder. Then, unlatch and swing the
SIM card holder open.
4. Insert the SIM card into the holder as shown,
beveled corner first, with the gold-colored
contacts on the SIM card face up (away from
the phone).
5. Swing the SIM card holder closed. The gold-
colored contacts on the SIM card meet the
2
3
4
5
G e t s t a r t e d
13
gold-colored contacts on the inside of the phone. Gently press the SIM card
holder into the phone until it clicks into place.
6. Replace the battery by positioning it (with the
label side facing up) so the gold-colored
contacts match up with those on the phone.
Slide the battery in until it snaps into place.
7. Slide the back cover until it locks into place.